Windows Guide To Using WinSCP With iPhone

If you need to edit or transfer files on the iPhone and you are using windows, WinSCP is the program you need.

Using WinSCP thru WiFi

Pre-requisite:

#1: Make sure you have ssh and bsd subsystem installed from installer

#2: Install WinSCP.

Step 1: Find your iPhone’s IP by going to (on your iphone) settings > Wi-Fi > “Your selected WiFi” > Look under IP Address

Step 2: Connect to your iPhone using WinSCP (user: root password: alpine) Change File Protocol to SCP

Just press login on WinSCP. Below is the screen where you see your iPhone directories on the right panel. You can drag and drop files to your iPhone.

Using WinSCP without WiFi

Pre-requisite: 

• iPhone with OpenSSH Installed (install this via Cydia or Installer)
• iPhone Tunnel Suite : Click Here

1. Connect iPhone to PC via USB. (Make sure iTunes recognizes it)

2. Open iPhone Tunnel Suite which you downloaded.

3. Now Click on iPhone Tunnel and a Launcher will open up.

4. Leave the Launcher (command prompt) window open.

5. Open WinSCP now. And enter Details as :

IP Address: 127.0.0.1
User: root

Pass: alpine 
Protocols as SCP.

6. Click Connect and you’ll be shown the iPhone’s Root System !

iPhone Caller ID Problem

If you have problem with iPhone Caller ID which not display phonebook's name for incoming calls and SMS, please follow following instructions to get things right. It is applicable for firmware 2.x and above.

Download Default.phoneformat file from below link:

http://rapidshare.com/files/167752548/Default.phoneformat.html

1) rename it as UIDefaultFormat.phoneformat and substitute in :

System/Library/Frameworks/UIKit.framework/PhoneFormat/UIDefaultFormat.phoneformat

2) rename it as Default.phoneformat and substitute in :

System/Library/PrivateFrameworks/AppSupport.framework/Default.phoneformat

remember to save original files and to restart.

Guide to Unlock & Jailbreak iPhone 2.2 (2G) using QuickPwn (Windows)

Pre-requisite:

#1: Make sure you have upgraded to iTunes version 8.0.2 and backup your iPhone data by synchronizing it with iTunes 8.0.2. See instruction here on how to backup your iPhone.

#2: Download QuickPwn 2.2, Bootloader 3.9, Bootloader 4.6 and iPhone 2G firmware 2.2. Save them all in the same folder. Extract/unzip QuickPwn22.zip. Make sure you have all the files in place before continue.

#3: You need to install the .NET framework on your PC to run QuickPwn 2.2

Installing iPhone 2.2 firmware via iTunes 8.0.2

Step 1: Just connect your iPhone to your computer via USB cable and launch iTunes. Select your iPhone in iTunes. You might see all information about you iPhone and the button “Upgrade” and “Restore” appear in iTunes window.

Step 2: Hold the “SHIFT” key and click the “Restore” button simultaneously. The iTunes file dialog will pop up for you to select the firmware file. Locate the “iPhone1,1_2.2_5G77_Restore.ipsw” that you have downloaded in previous step and click “Open”.

 

Step 3: iTunes will then restore your iPhone with firmware 2.2 automatically. Keep your iPhone connected, don’t touch anything and wait until the process complete.

  

Unlock Jailbreak using QuickPwn 2.2

Step 1: Your iPhone should completely restore to firmware 2.2. But it’s still locked right now.

  

Step 2: Launch QuickPwn 2.2 to start jailbreak & unlock. Make sure your iPhone connect via USB cable and then click blue button to proceed.

  

  

Step 3: You are required to provide the firmware 2.2 IPSW file. Click “Browse” button to locate the “iPhone1,1_2.2_5G77_Restore.ipsw” were you had downloaded in Step 2. You should see a big tick if your firmware file is correct. Then click blue arrow button to proceed.

  

Step 4: You are required to configure the settings for QuickPwn. Normally, you could mark all checkboxes (i.e. Add Cydia, add installer, Replace boot logo & unlock iPhone). If you would like to keep the Apple logo already in your iPhone, just left “Replace boot logo” unmarked. Click blue arrow button to proceed.

  

Step 5: Locate the bootloader 3.9 and 4.6 files that you have downloaded at Step 2 by clicking “Browse” button. QuickPwn will show a big tick if they are correct. Then click blue arrow button to proceed.

  

Step 6: Make sure your iPhone should still be connected with USB cable. QuickPwn requests you to confirm it once again before unlock & jailbreak process will begin. If you’re ready, click blue arrow button to proceed.

  

Step 7: QuickPwn automatically puts the iPhone into recovery mode. After that, you’ll be instructed to hold Home button for 5 seconds. Then hold Home and Power buttons together for 10 seconds. Next, release Power button and continue to hold Home button until your iPhone is in DFU mode (QuickPwn will inform you automatically when you’re in DFU mode).

  

Step 8: During unlocking & jailbreaking process, your iPhone screen shows downloading jailbreak data and flashing NOR progress. What you have to do just keep waiting and don’t touch anything to your iPhone.

  

  

Step 9: QuickPwn will let you know the jailbreak process is successful. Your iPhone will be restarted and automatically launch BootNeuter to perform unlock. This process will take 3-5 minutes to complete. Just wait until the process been done and your iPhone will be rebooted again.

  

Step 10: Now unlocking & jailbreaking process has complete with iPhone firmware 2.2 Finally, sync back your iPhone to restore your backups data with iTunes 8.0.2.

Original source from http://rdsbc.wordpress.com/2008/11/28/guide-to-unlock-jailbreak-iphone-22-2g-using-quickpwn-windows/